Our Mission: To build up a new stock 2009 Polaris Ranger XP with our most popular UTV accessories, and to let the owner's grandson's do it all to prove that it's so easy a kid can do it!
We wondered how a full cab back and window could be in such a compact box.
Click images to Enlarge
That is, until we got it open and saw how clever it was packed!
Click images to Enlarge
Set the upper section on top of the lower and bolt them together.
Click images to Enlarge
Install clamps onto roll cage.
Click images to Enlarge
Slide cab back into position for a trial fit.
Click images to Enlarge
S.M.I.T.s used a piece of soapstone to mark the area where the cab back touched the roll cage supports.
Click images to Enlarge
Okay, so the lines aren't perfectly straight, but they are fine for what we need them for...
Click images to Enlarge
Using the supplied weatherstripping, install it over the lines.
Click images to Enlarge
Reinstall the cab back using the same rear clamps and spacers as the top uses.
Click images to Enlarge
Install bolts through the headrest support.
Click images to Enlarge
Tighten remaining clamps.
Click images to Enlarge
Done! Now this thing is almost weathertight. Well... almost. Note that the lower window has a steel mesh cover to preclude any loose objects in the bed from flying through the window. We left the protective sheets over the windows for the time being while we perform other installations.
Fits: 2009 Ranger
Must be used with EMP Hard Top (10286) Sold Seperately
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}