Our Mission: To build up a new stock 2009 Polaris Ranger XP with our most popular UTV accessories, and to let the owner's grandson's do it all to prove that it's so easy a kid can do it!
Good job of packaging. Both pieces of windshield
(upper and lower) are zip tied together and are covered with
a protective sheet. Detailed instructions include pictures for
reference during installation.
Click images to Enlarge
Peel back the protective sheeting around the outer edges ONLY enough to reveal the pre-drilled holes.
Click images to Enlarge
install rubber grommets into holes. S.M.I.T.'s said that a little "spit" aided with installation.
Click images to Enlarge
Install seals onto lower windshield.
Click images to Enlarge
Remove the two roll cage bolts from lower front joint. You'll need a 5/16" allen wrench for this. Also, using a magnet on the nylock nuts help to keep from dropping them down inside the dash.
Click images to Enlarge
Slide the lower windshield bracket into the roll cage and "sandwich" it between the joints,
Click images to Enlarge
Reinstall the two factory bolts.
Click images to Enlarge
Install lower windshield using the supplied spinner bolts.
Click images to Enlarge
install the upper windshield using the six roll bar clamps.
Click images to Enlarge
Pay particular attention to the order of washers on windshield and clamps during installation. If you don't do it as shown in the installation instructions, you might crack the windshield!
Click images to Enlarge
Done! Now you are ready to ride, no matter what the weather is! Please note that the lower windshield can easily be removed to increase air flow into cabin while the upper windshield is still in place.
Trail Armor’s CoolFlo Windshields, made of 1/4" mar-resistant coated (on the interior and exterior) polycarbonate, provide excellent face and eye protection and relieves back draft dust and heat for a comfortable ride. They are easy to install, and the lower section can be removed and replaced on the fly. Trailers great with both panels in place. Securely mounts with a total of 9 brackets for added rigidity while towing and on the trail.
All manufacturers' names, numbers, symbols and descriptions are used for reference purposes only, and it is not implied that any part listed is the product approved by any of these manufacturers. Arctic Cat Prowler®, Can-Am Commander®, Cub Cadet Volunteer®, Honda Big Red®, John Deere Gator®, Kawasaki Mule®, Kawasaki Teryx®, Kubota RTV®, new Holland Rustler®, Polaris Ranger®, Polaris RZR®, and Yamaha Rhino® are all registered trademarks of the respected manufacturer. All parts listed are aftermarket replacement parts. Part numbers, illustrations and images used for reference purpose only. No implication is made that these are original equipment parts, from those sources whose part numbers are used here for reference or that they are approved by these companies.
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}