Electric Bed Lift Kit For 2009 Polaris Ranger
Our Mission : To build up a new stock 2009 Polaris Ranger XP with our most popular UTV accessories, and to let the owner's grandson's do it all to prove that it's so easy a kid can do it!
Rocker Switch on dashboard.
Comes with everything you need.
Powered by an enclosed hydraulic actuator.
Lift weight matches manufactures specs.
Easy install .
8080110 (Product Info Page ) $645.95
Click images to Enlarge
Great job of packaging.
Click images to Enlarge
Bed Lift Cylinder and Harness
Click images to Enlarge
Manual lift is hard with nothing in bed.
Click images to Enlarge
Maval Gear (Unisteer) 2009 Polaris Ranger Hydraulic Bed Lift Installation Open bed fully.
Click images to Enlarge
Remove top pin from stock cylinder
Click images to Enlarge
Tilt bed all the way back.
Remove latch assembly from bed.
Click images to Enlarge
Remove lower pin from stock cylinder.
Install lower bracket on new stock cylinder
Click images to Enlarge
Install new hydraulic cylinder and put stock pin in lower bracket.
Click images to Enlarge
Disconnect battery leads.
Click images to Enlarge
Complete "plug & play" wiring harness includes relay and switch already wired in place.
Click images to Enlarge
Remove switch "knock out" on dash.
Click images to Enlarge
Remove the two middle plugs from switch so that you can install.
Click images to Enlarge
Run the relay section of harness through dash.
Click images to Enlarge
Plug connectors back into switch
Click images to Enlarge
Run cylinder end of harness back through dash.
Click images to Enlarge
Route cylinder end of harness down through the firewall in prep of routing to rear of vehicle.
We ran the harness in parrallel with the rear brake lines to hydraulic cylinder.
Click images to Enlarge
Plug harness into pigtail on cylinder and zip tie out of the way.
Use new bolt and spacers to hook the top of cylinder to bed bracket.
Click images to Enlarge
Hook up leads to battery terminals
Click images to Enlarge
Test to make sure switch is oriented correctly for "up and down".
Click images to Enlarge
Install switch into dash.
Done. Now you are ready to use the bed lift.
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
){kind=link}
){kind=link}